Every winter, you might light up your fireplace and then sit near it. But as soon as you move away, you might wonder why it does not heat up the entire room. If you are in the same dilemma, it is time for you to start investing in a fireplace fan for wood-burning fireplaces.
The best fireplace fans have more advantages than that you can think of. They ensure even spreading of the heat from the fireplace to every nook and corner of the room. The result of this would be a warm and cozy room where all the family can snuggle up during the cold winter evenings.
Do fireplace fans really work?
Before buying a fireplace fan or blower, you will always be skeptical of whether it works or not. But, we want to assure you that fireplace fans and blowers definitely work. But this depends upon the specifications of the fan or blower you buy.
You should buy the best gas fireplace blower and kinetic fans for wood stoves, as they deliver what they promise. They make your fireplace more efficient by rotating the warm air around the room. It ensures that no corner of the room stays cold. They also help your fireplace to produce more heat.
What is the best wood burner fan?
There are a variety of best wood burner fans available over the internet. We have discussed some of them below in detail. The factors which serve as the criteria for the best gas fireplace blower include
- noise level
- airflow capacity
- rotations per minute of the motor
- weight
- material
- mounting type
- power source
- fuel efficiency
- manufacturer’s warranty
Below, we have included a table that summarizes the key factors of some of the best wood burner fans. Following the table is a detailed analysis of each of those fans.
How many CFM do I need for a fireplace blower?
In general terms, CFM means Cubic Feet per Minute. It measures the volume of air in cubic feet for each minute it moves. As an average,
- Good CFM ranges from 4,000 to 5,000
- Better CFM ranges from 5,000 to 6,000
- Best CFM is over 6,000
The higher the CFM, the better is the fan’s ability to move air within the room. Hence, you should go for higher CFM fans instead of lower ones.
When we talk about high temp fans fireplace, the CFM can be as little as 100 or 200 cubic feet per minute. It can also be as much as 800 CFM or more for a large fire in an open fireplace. Hence, the larger the area of the room you need the fireplace fan for, the greater should be the fan’s CFM.
How do I get more heat from my fireplace?
Once you fire up your own fireplace, you will realize that heat from it only reaches a specific distance. Hence, you will start searching for ways that increase the heat produced by your fireplace. First, you should use dry, hard, and well-seasoned logs for generating fire. They have low moisture content, so they burn well.
Moreover, you should ventilate the room and sweep your chimney. It increases the airflow within the room. Also, you should start the fire, and once it starts, you should keep it going.
One best option to get more heat from your fireplace is to install fireplace fans and blowers. They circulate heat from the fireplace to the entire room. Thus, they ensure that your room has an equal heat distribution. Fireplace fans maximize the potential of your fireplace.
The above video summarizes ten of the best fireplace fans in under five minutes.
Comparison Table: Best Fireplace Fan
The table below summarizes some of the best fireplace fans. It includes their dimensions and their ratings. We hope it helps you to get an idea of which best fireplace fans suit your needs the best.
For a detailed insight into the best fireplace fans, you can scroll down below the table. Their extra features will aid you in making a well-researched and well-informed decision.
Best Fireplace Fans | Header label | Rating | |
1 | CAFRAMO Ultra Air, 810 CAKBX Classic Styled, Heat Powered Wood Stove Fan, 125 CFM, Nickel, Mid-Sized, 7.9″ Blade | Check price on Amazon | 9.8/10 |
2 | GALAFIRE [ 2 Years Heat Powered Wood Stove Fan 122°F Fast Started Fireplace Fan Silent Small Log Burner Fan + Thermometer | Check price on Amazon | 9.6/10 |
3 | Heat Powered Stove Fan , EIVOTOR 4 Blade Auto Sensing Fireplace Fan for Wood / Log Burner / Fireplace, Eco Friendly and Efficient wood stove fan | Check price on Amazon | 9.4/10 |
4 | Home Complete Stove Fan Heat Powered Fan for Wood Burning Stoves or Fireplaces-Quiet and Low Maintenance, Disperses Warm Air Through House | Check price on Amazon | 9.2/10 |
5 | SISIDZ 4 Blades Flue Pipe Stove Fan Heater Powered Fixed on The Chimney Pipe of Wood / Log Burner / Fireplace Black | Check price on Amazon | 9.0/10 |
1. CAFRAMO Ultra Air, 810 CAKBX Classic Styled, Heat Powered Wood Stove Fan, 125 CFM, Nickel, Mid-Sized, 7.9″ Blade

Highlights:
- Nickel color
- Aluminum material
- 125 CFM airflow capacity
- Free-standing mounting type
Our Rating
9.8/10
Product Review:
The CAFRAMO UltraAir fireplace fan warms your room up to 31% faster, making it ideal for rooms up to 240 square feet.
Pros
- Saves 14% fuel by efficiently distributing heat from the fireplace
- Operates by generating power from converting heat from the fireplace into electricity
- 2-year limited warranty
Cons
- Not very efficient airflow capacity
2. GALAFIRE [2 Years Heat Powered Wood Stove Fan 122°F Fast Started Fireplace Fan Silent Small Log Burner Fan + Thermometer

Highlights:
- Four blades
- Anodized aluminum material
- 430 feet/min maximum airflow
- 530 grams of weight
Our Rating
9.6/10
Product Review:
The GALAFIRE N429 spreads heat from your fireplace to the entire room, and the magnetic thermometer that comes along with it measures operating temperature to keep your fireplace safe.
Pros
- Self-powered by heat – no electricity or batteries required
- Burns less fuel hence energy efficient
- Silent, whisper-quiet operation
- Lifetime technical support
Cons
- Small in size
3. Heat Powered Stove Fan, EIVOTOR 4 Blade Auto Sensing Fireplace Fan for Wood / Log Burner / Fireplace, Eco Friendly and Efficient wood stove fan

Highlights:
- Four blades
- Noise level below 32 dB
- 80-150 CFM airflow capacity
- High temperature resistant anodized aluminum material
Our Rating
9.4/10
Product Review:
The heat powered fireplace fan by EIVOTOR is an auto-sensing fan that is an eco-friendly and efficient fireplace fan for wood-burning fireplaces.
Pros
- Less consumption, more efficiency
- Saves 28% fuel cost by improved warm air circulation, which results in greater comfort
- No batteries or electricity required
- A 30-day refund service and after-sales protection of up to 6 months
Cons
- Moves little air
4. Home Complete Stove Fan Heat Powered Fan for Wood Burning Stoves or Fireplaces-Quiet and Low Maintenance, Disperses Warm Air through House

Highlights:
- Four blades
- Metal material
- 170-190 CFM airflow capacity
- Above 900 RPM motor
- Oil rubbed finish type
Our Rating
9.2/10
Product Review:
The fireplace fan by Home-Complete disperses warm air throughout the house while also being low maintenance at the same time.
Pros
- No electricity required as it operates off the heat produced by your fireplace
- Whisper quiet
- Practically maintenance-free as you only have to dust it off occasionally and put some light oil on the blade shaft to keep it spinning smoothly
- Built-in fire stoking indicator
Cons
- The metal on the fan gets hot while placed in front of the fireplace, so you can’t move it without mittens
5. SISIDZ 4 Blades Flue Pipe Stove Fan Heater Powered Fixed on The Chimney Pipe of Wood / Log Burner / Fireplace Black

Highlights:
- Black color
- Aluminum material
- Matte finish type
- Four blades
Our Rating
9.0/10
Product Review:
The SISIDZ Flue Pipe fireplace fan is designed to circulate the hot air created by the fireplace. It operates at normal surface temperatures between 80 ° C and 350 ° C.
Pros
- Quiet performance
- Energy-saving as the thermoelectric module acts as a small generator to power the fan motor
- Stable for inclined surfaces and can be fixed on the chimney pipe, hence saving space
- Delivery within ten days of order placement
Cons
- Low RPM hence low air movement
Recent Posts
- Best Fireplace Fans – Much needed!
- Best Fans for Garage Gyms
- Best exhaust fan for the smoking room
- Best Oscillating Fan for Grow Room
- Best bathroom exhaust fan with light -Quiet Ones
- Best ceiling fan for low ceiling
- Best Outdoor Ceiling Fans with Best CFM
- Best Bathroom Fan with Light & Heater
What are fireplace blowers?
Fireplace blowers have the same purpose as fireplace fans. It is to circulate air throughout the room. It maintains a higher average indoor temperature. Some people prefer blowers over fans. Because of this, we have included a couple of recommendations for them too.
The table below summarizes some of the best fireplace blowers. It includes their dimensions and their ratings. We hope it helps you to get an idea of which best fireplace blower suits your needs the best.
For a detailed insight into the best fireplace blowers, you can scroll down below the table. Their extra features will aid you in making a well-researched and well-informed decision.
Best Fireplace Blowers | Header label | Rating | |
1 | VICOOL Speed Variable S31105 Fireplace Blower 110V ~ 120V for GHP Group, Monessen / Majestic (MHSC Brands), Majestic Dutchwest Windsor, CFM US Century Plate Steel Freestanding Wood Stove Fireplace | Check price on Amazon | 9.0/10 |
2 | Hyco Fireplace Blower Fan Kit for Lennox, Superior, Rotom FBK-100 | Check price on Amazon | 8.8/10 |
3 | VICOOL GFK-160 GFK-160A Replacement Stove Fireplace Blower Fan KIT with Ball Bearings Motor for Heat N Glow, Regency Wood Stove | Check price on Amazon | 8.6 / 10 |
1. VICOOL Speed Variable S31105 Fireplace Blower 110V ~ 120V for GHP Group, Monessen / Majestic (MHSC Brands), Majestic Dutchwest Windsor.

Highlights:
- Black color
- 2800 RPM motor
- 86 CFM airflow capacity
- Alloy steel material
Our Rating
9.0/10
Product Review:
The S31105 fireplace blower by Vicool Store includes four mounting hardware screws and one heat gasket. It quickly increases the temperature of the room by promoting the flow of air.
Pros
- Quiet and energy-saving
- The manual speed switch lets you control the speed depending upon your needs
- Easy to install
- Sturdy structure with protective cover
Cons
- Not as quiet as advertised
2. Hyco Fireplace Blower Fan Kit for Lennox, Superior, Rotom FBK-100

Highlights:
- Aluminum color
- Metal material
- 3000 motor RPM
- 130 CFM airflow capacity
- Wall mount
Our Rating
8.8/10
Product Review:
The Hyco FBK100 fireplace blower fits almost all of the Lennox, Superior, and Rotom fireplace models. However, a designated wall switch for the blower (electrical outlet below fireplace) must be installed prior to using the FBK-100 kit.
Pros
- Easy to install
- Reduces the interior wall temperature directly above the heater outlet
- Circulates the warm air in the room better
Cons
- Requires a designated wall switch
3. VICOOL GFK-160 GFK-160A Replacement Stove Fireplace Blower Fan KIT

Highlights:
- Aluminum color
- Metal material
- 3000 motor RPM
- 160 CFM airflow capacity
Our Rating
8.6/10
Product Review:
The GFK 160 fireplace blower by VICOOL Store fits various fireplace brands, including Heat N Glo, Heatilator, Quadra-Fire, and GTI. It includes a blower fan unit, 3-prong power cord, universal connecting wire, rheostat and thermostat, and installation instructions.
Pros
- 75 dB maximum noise level makes it quiet
- The rubber feet and Velcro pads keep the fan where it belongs and damp any vibrations
- Provides value for its price
Cons
- Installation instructions are not very clear
Conclusion
The article served as a summary for the best fireplace fans available in the market. It included all their noteworthy specifications, along with a detailed analysis to ensure that you buy the product that checks all the boxes of your requirements.